Washing machines have made life easier, yet they can run into problems that everyone should know in order to get them fixed. You can prevent a few of these problems by avoiding common mistakes while for most of the problems, you may have to hire an appliance repair technician. Some of the most common top-loading washing machine common problems are listed below.

Top-Loader Washing Machine Problems And Solutions

Leaking Washing Machine

Almost everyone who has used or owned a washing machine can relate to this problem. When the washing machine is leaking, it can have multiple reasons. These reasons include a loose hose connection, broken or damaged hose seal and a damaged drain pipe.

This happens due to wear and tear. However, if someone fixed a leaking washing machine and the issue happens quite sooner, then it may be due to improper installation. In order to fix this issue, you should get help from an experienced professional.

Washing Machine Not Spinning

This is also a common problem and it can happen due to many reasons. If your washing machine is not spinning, check if you’re not overloading the washer. Too many clothes don’t allow the agitator (the spinning part) to spin. And check if you’re closing the door properly or if the lid switch is broken.

Other reasons can be an unbalanced washing machine, broken drive belt, faulty motor, drainage problems, or control board issues.

Smelly Washing Machine

Smell issues are one of the common problems people encounter when it comes to washing machines. The major reason behind this is washing dirty linen. Bacteria and other smelly germs get accumulated and lead to a smelly washing machine. Moreover, frequent use of cold washing is another reason for a stinky washer.

Washing Machine Not Filling With Water

Another common problem is no water in the washing machine or the washing machine not filling with water. Usually, the issue lies in a faulty water inlet valve, malfunctioning water level switch, water supply problems (low water problems or closed valve), and clogged filters.

If all the components are working okay, then you should check the control board because it may be faulty. Control board problems can cause any function or feature of the washing machine to stop working.

Washing Machine Not Draining

Drainage should be perfect if a washing machine is working fine. Bad drainage means there is dirty water in the washing machine with nowhere to go. To solve this problem, you should first check the top lid. If the top lid is defective, it would not allow a top-loading washing machine to drain perfectly.

Other reasons in this regard are a clogged drain hose, a faulty drain pump, or a blocked filter. These problems should be fixed in order to bring your washing machine to drain properly again.

Washing Machine Is Bouncing And Shaking

In this problem the washing machine bounces around and makes loud noises. This issue occurs when the machine is not sitting perfectly on the ground. A ground surface that is not level can cause this issue.

Another possible reason can be the machine’s bolts and nuts may be loose along with a damaged drive belt. Moreover, this problem is reported many times when the machine is simply overloaded.

Noisy Washing Machine

In some instances, washing machines make loud noises without shaking. Loose components and overloading can also be the cause of a nosy washing machine. Other reasons could be worn out drum bearings, broken basket, faulty drum spider arms, worn out suspension rods, failing motor, and foreign objects in the drum.

Washing Machine Is Staining Clothes

Sometimes the washing machine can ruin or damage your clothes. There are few reasons behind it and knowing them can help you prevent this issue. First it can be when the machine is overloaded with clothes. Other reasons are selecting high speed for the spinner, adding heavy clothes with delicate or soft ones, and not cleaning the drum. Moreover, detergent mistakes like using the wrong detergent or using too much of it can also stain or damage clothes.

These problems are simple to fix and you will not need any kind of tools or help. Just understand the reasons and avoid these mistakes next time.

Washing Machine Not Turning On

In some cases, the washing machine stops working and refuses to turn on. In such a situation, the problem may be with the power source. Either the wire has been damaged or the plug is faulty or the power source is not providing enough power.

Fixing these issues is easy at home. However, if the machine still refuses to turn on it may have some serious problem like control board issues, a faulty motor, or something else. This can be a good case to consult an expert.

Washing Machine Door Not Opening

If the door is not opening, first check if the machine is filling with water because the door doesn’t open when it happens. If you want to make sure it’s not that, you can start a new cycle so the washing drains and the door should be openable. During that, you should also inspect the drain and ensure there are no clogs.

Another cause of the door not opening is an overheating washing machine. Overheating can be due to using the machine for too long continuously or due to an issue with a component like the motor. If your washing machine overheats frequently, you must call in a professional. The expert will determine why the machine is overheating and the door is not opening.

Door problems are common in dishwashers as well. So, if the dishwasher door doesn’t open or is stuck, hire a dishwasher repair Springfield professional.

Preventive Measures To Avoid Top-Loader Washing Machine Problems

Any machine is prone to developing problems. However, many can be prevented if good care is taken. With regular care, a machine will not only last longer but will save you repair costs. Some tips are as below.

Regular Care And Maintenance

Prevention is better than cure. This is where regular care becomes necessary and helps a washing machine work for an extended time period. Regular care should include cleaning the machine every now and then and inspecting it for problems.

Seek Help From Professionals

Whenever your washing machine face problems, you should seek help from a professional. Finding an experienced professional in this regard is important.

Wrong selection of the professional can ruin the machine in spite of expensive repairs. That is why you should find a reliable expert.

Avoid Overloading Your Washing Machine

Lots of problems with top-loading washing machines occur when it is frequently overloaded. It can cause machine to spinning problems, vibration, noises, and faster wear and tear. Plus, it may lead to drainage issues and the clothes may be damaged. Thus, overloading it is the mother of all problems. That is why you should avoid it.

Select A Level Surface For Your Washing Machine

Selecting a leveled surface is a basic requirement for using a washing machine. If the surface is not level, it can lead to a shaking washing machine and cause other problems.

Conclusion

A top-loading washing machine common in households. But many washing machines break down sooner due to neglect. So, keep the washing machine clean, schedule regular maintenance, and follow preventive measures to take care of your washing machine. For dealing with washing machine problems, hire a washer repair Alexandria professional.